Skip to Content

Solid brass

Tree lighting in solid brass

A lit tree gives a garden its height at night. A single old oak, a row of pleached limes, the olive tree by the terrace: once they are lit, the garden has a ceiling and a far end.

There are two ways to do it. From the ground, the light climbs the trunk and opens in the crown. From inside the tree, it falls through the branches and lays their shadow on the lawn, as moonlight does. Most gardens want a little of both.

A tree also grows. The fixture that lights it has to stay in place for twenty years and be moved a little now and then. Brass and copper do not rust, and they weather to the colour of bark.

Which fixture, for which tree

Vrille. A brass head 20 mm across on a copper stem one metre long. The stem is wound by hand around a branch, with no screw and no strap, and can be loosened as the branch thickens. From inside the crown, a 25° or 40° lens sends the light down through the leaves.

Zapa Ground. Set flush in the lawn at the foot of the trunk, it sends the light straight up the bark. Nothing stands in the way of a mower.

Zapa Native Spike. A small spot on a spike, set a step back from the tree and aimed at the crown. The 40° lens suits a young or spreading tree.

Zapa Focus Spike and Yoke. A zoom from 20° to 50°. The same fixture can wash the whole crown of an olive tree or close in on the trunk, and be adjusted as the tree fills out.

Zapa Shoot Yoke. A 10° or 20° reflector for a tall, narrow subject: a cypress, a poplar, the trunk of a mature beech.

Zapa Native Yoke. The Native head on a yoke, fixed to a wall, a beam or the tree itself, and turned exactly where it is needed.

Wall Washer. For the large tree that carries the whole garden: up to 1050 lumens and a wide beam, placed on the ground 50 cm from the trunk.

Tell us which trees you have and how tall they are. We will suggest the fixtures, the beams and where to place them.