Solid brass
Path and step lighting in solid brass
On a path or a flight of steps, the light has one job: to show where the foot goes. It should fall on the ground and stay there. A light that shines into the eyes makes the next step harder to see, not easier.
So these fixtures sit low, in the wall beside the steps or close to the ground, and send their light downward. They are also the ones most exposed to boots, wheelbarrows and garden hoses. In solid brass they take the knocks, and a damaged part can be replaced without touching the masonry.
Which fixture, for which path
Step In Wall. A 57 mm square of raw brass set into a wall, a step riser or the stone edge of a pool. Mounted between 25 and 60 cm above the ground, it lights the step for a metre to a metre and a half in front of it. By day it reads as a neat brass square.
Zapa Ground 3. A brass disc of 35 mm recessed in a wall. Its optic is asymmetric: three quarters of the light go down, onto the tread or the gravel.
Recessed Wall One. A 102 mm brass square flush in the masonry, for wider steps and for the walls along a drive.
Zapa Ground 2. A small brass head set in the ground, lit on both sides. Placed in the middle of a border edge, it throws light along the path in both directions.
Zapa Ground 1. The same head lit on one side only, for the foot of a wall or the first step of a stair.
Zapa Fungo. A brass hat on a stem almost a metre tall. All its light goes down in a wide circle, enough to carry a path from one fixture to the next every few metres.
Glow Allium and Glow Reed. Slim brass stems with a soft glow near the top. They do not light the path, they draw its line, which is often all a garden path needs.
Send us a plan or a few photos of the path. We will tell you how many fixtures it takes and where to put them.